Hose fittings are the most common type of connection used in hydraulic systems, and they are often prone to crimping. Consider investing in a hydraulic hose press machine to help your business create hose fittings with tighter seals and eliminate crimps.
There is a huge need for hydraulic hose crimping machines, which are currently unavailable in the market. If you research the market and find out where this need is coming from, you may be able to invest in hydraulic hose crimping machine and supply to the industry – with a healthy profit.
Crimping fittings on a hose is a very important step in hydraulic hose assembly.
Crimping fittings are done on hydraulic hoses to attach them to the fitting, connectors, and other parts of the machine. The crimping machine is used for this process by mechanically contracting the metal jaws around the circumference of the hose end and then pressing the jaws together with great force for a short time.
Crimping fittings is a vital step of hydraulic hose installation. The process is done by using a hydraulic hose press machine.
Hydraulic hose crimping fittings is mainly used to close off the end of the hose to prevent leakage in both ends and to seal the connection between the female and male ends by compressing them together.
Hydraulic hose crimping fittings are different from steel clamps with a rubber gasket in the shape of an O-ring which is used to seal connections on hoses, pipes, and tubing without cutting into them.
This type of clamp has an inner diameter that fits tightly around the tube, leaving no gap for leaks or liquids to escape. These types of clamps are usually made from low-cost materials like plastics or aluminum that are easily molded and machined.
Crimping hose fittings on a hydraulic hose press machine is a very simple process.
1) Place the assembled fitting, with the pin coupling in the press.
2) Push on the handle to crimp and cover the coupling.
Crimping a hose to the correct fitting is an important step in ensuring your hose doesn’t leak. It can be confusing, but luckily we have the online crimp fittings guide for everything you need to know. Now you can crimp connectors quickly and easily, without risking a leak.
Crimped fittings are used on air hoses to make them more durable. This process is often seen as too difficult by many, but we’re here to show you how it’s done. Start by cutting both ends of the hose square with a utility knife. Next, use a crimping tool to squeeze the flattened area of the fitting until it’s just big enough for the hose to pass through it. Finally, slip the hose into the crushed area and voila! You’re done!
Crimping fittings onto a hose is a professional skill that not everyone can do. With our online crimping tool – you’ll learn how to crimp fittings on hoses in just 4 easy steps! It doesn’t matter if you’ve never done it before or have 10 years of experience, it’s that easy!
-
DSG250 6-51mm Hydraulic Hose Crimping Machine Hose Pressing Machine
Inquire Us -
HM51S Manual Hydraulic Hose Crimping Machine Portable Hydraulic Hose Crimper Tool
Inquire Us -
P52 6~51mm ( 1/4~2″ ) Finn Power Hydraulic Rubber Hose Crimping Pipe Press Machine
Inquire Us -
Factory Sales Quick Change 6 Patent 1/8”1/4”’-2”4” Hydraulic Hose Crimping Machine Hose Pressing Machine
Inquire Us -
Ce Certification 10Set Dies 4-51mm Hydraulic Hose Crimping Machine Crimper Hydraulic Hose Pipe Press For Hose
Inquire Us